Director Tab >> Web Listener Template Pages

Director Tab >> Web Listener Template Pages (Reference)

Company Preferences >> Director Tab >> Web Listener Template Pages Tab
Company Preferences >> Director Tab >> Web Listener Template Pages Tab

The Web Listener Template Pages Tab of the Director Tab sets where and how your Ticketing Site pages are stored and updated.

Custom Template URL

This is normally the address of the primary TM Web Server which has been designated to host your template pages. It will typically be an IP Address that looks like http://192.168.x.x.


Port Number

This is typically set to 8111 for the server that Theatre Manager uses to retrieve web page templates. This generally never changes unless there is a desire by your network administrator to use alternate internal ports.


alt="Template
Template Folder Contains: ALL DEFAULT PAGES AND TMCustom FOLDER IN A SUB DIRECTORY

ONLY THE CUSTOMIZED PAGES IN THE MAIN DIRECTORY") %} Theatre Manager Server always gets the latest templates from its internal resources so the standard pages are always kept up to date. There are two choices for this setting to indicate how you want to store the custom pages. This is NOT the preferred option. Refer to typical pages that are changed for more information.


alt="Template
Template Folder Contains: ONLY THE CUSTOMIZED PAGES IN THE MAIN DIRECTORY

Theatre Manager Server always gets the latest templates from its internal resources so the standard pages are always kept up to date. There are two choices for this setting to indicate how you want to store the custom pages. This IS the preferred option. Refer to typical pages that are changed for more information.


Last Cache Clear

The date the cache on the classic web listener was last cleared. The Clear Web Cache button to the right of this field can be used to reset or clear the cache on all currently running listeners by sending them a message that the web pages are all invalidated. It may take a few seconds as each listener re-reads them.

The listeners generally detect page changes within a minute and start using them automatically, but it will do it right away if you press this button. You can also clear the cache on the status page of any web listener.